HERO XTREME 160R PROGRAMMED FI - ABS INDICATOR; SIDE STAND INDICATOR;SWITCH

22
(1) ABS indicator
At any point if ABS indicator remains “ON”
then ABS is not working, but the brakes still
work normally. Reduce your vehicle speed and
visit your Authorised Hero MotoCorp
workshop.
The ABS indicator (1) on speedometer come
“ON” for approx 1.8 seconds when the
ignition switch is turned “ON” ( ) & then
keeps blinking until the vehicle attains a speed
of 5 km/h.
ABS INDICATOR
When the system functions normally indicator
goes “OFF” ( ) once vehicle speed exceeds
5 km/h.
(1) Side stand indicator
(2) Side stand switch (3) Side stand spring
3
1
A side stand switch (2) is provided in the side
stand, when the side stand is down (ignition
switch “ON” ( )), the switch enables the side
stand indicator lamp to glow on the
speedometer panel.
SIDE STAND INDICATOR/SWITCH
For the safety of the customer a side stand
indicator (1) is provided.
1
WARNING
!!
While riding the vehicle in normal condition, do
not press the “ to Integrated start-kill switch
“OFF” ( ) position to avoid any damage
(Wheel locking leading to accident, part
damage, battery discharge etc.).
2