HETEC V-Switch quad II - Page 24

V-Switch quad II - Installation and Operation Manual
ON SCREEN DISPLAY
20
SECURITY LEVEL 4
As security level 5, with the following additional settings in the OSD:
SYSTEM OSD POSITION
MODE PIP / START
CONFIGURATION RECALL
VIDEO FORMAT
- Modify PiP settings in Hotmouse Menu
- Changing both channels in Dual mode
- Changing the fixed PiP channel in PiP mode single fixed
SECURITY LEVEL 3
As security level 4, with the following additional settings in the OSD:
SYSTEM OSD LANGUAGE
VIDEO BRIGHTNESS / CONTRAST / HORIZ POSITION / VERT POSITION
SCREEN WIDTH / PHASE
USB DEVICE 1-4
SECURITY LEVEL 2
As security level 3, with the following additional settings in the OSD:
SYSTEM HOTKEY / HOTMOUSE / QUAD MODE
CONSOLE KEYBOARD / TOUCHSCREEN
SECURITY LEVEL 1
As security level 2, with the following additional settings in the OSD:
SYSTEM DISABLE CHANNEL
CONSOLE MULTIMONITOR / VIDEO OUTPUT
VIDEO DVI/VGA
COMPUTER MOUSE / RESET PS/2
- Switch video output to VGA (using hotkey ‘V’ or front panel buttons 1+2)
OSD - SYSTEM - SECURITY