HETEC V-Switch quad II User Manual

V-Switch quad II - Installation and Operation Manual
HOTMOUSE
61
Hotmouse Menu – PIP MODE (continued)
Single fixed: One selected PiP image is permanently
displayed.
Single direct: Press the front panel buttons 1, 2, 3, or 4
to directly select the PiP channel you want.
Single dual: The left half of the first channel is displayed
at full size next to the left half of the second channel.
Use the „active“
setting to select
the active
channel.
Single scan: Cycles through the PiP images at a set
interval.
Hotmouse Menu - MODES
To switch the
active channel
use the OSD,
Hotkeys or front
butons.

HETEC V-Switch quad II Specifications

General

Brand	HETEC
Model	V-Switch quad II
Category	Switch
Language	English