Hi Sharp 16 CH DVR - Page 20

20
2.13.1 USB upgrade
(1) Copy provided firmware file to your USB memory stick.
(2) Connect USB memory stick to USB port of DVR.
(3) Press Menu button and go to SOFTWARE UPDATE.
[MENU Æ SETUP Æ password Æ SYSTEM Æ SOFTWARE]
(4) Select UPGRADE , then small window will appear.
(5) Select USB UPGRADE and press ENTER button.
(6) Device – Select USB device including firmware file.
(7) Select firmware file and press ENTER button.
(8) Select OK and press ENTER button to start S/W upgrade.
(9) After completing upgrade, the system will reboot automatically.
2.13.2 Network upgrade
(1) Press Menu button and go to Software Update
[MENU Æ SETUP Æ password Æ SYSTEM Æ SOFTWARE]
(2) Select UPGRADE , then small window will appear.
(3) Select NETWORK UPGRADE and press ENTER button.
(4) Check out whether Server IP and FILE NAME are correct. If shown information is
wrong, correct SERVER IP and FILE NAME and press ENTER button to input new
information by text input Dialog box.
(5) Select OK and press ENTER button to start S/W upgrade.
After completing upgrade, the system will reboot automatically.
Note
The firmware file should be in Root directory of USB memory.
Note
Make sure the information of Server IP & File name through your supplier.