Specifications and requirements
0.8–0.9 mm (0.031–0.035 in) Control
system:
Remote control
Starting system:
Electric starter
Starting carburetion system:
Electronic fuel injection
Valve clearance (cold engine) IN:
0.15–0.25 mm (0.0059–0.0098 in) Valve
clearance (cold engine) EX:
0.25–0.35 mm (0.0098–0.0138 in) Min.
cold cranking amps (CCA/SAE):
380.0 A
Min. marine cranking amps (MCA/ABYC):
502.0 A
Min. reserve capacity (RC/SAE):
124 minutes
Maximum generator output:
F60 F40
Drive unit:
Gear positions:
Forward-neutral-reverse
Gear ratio:
(28/12) F60
(28/12) F40
Trim and tilt system:
Power trim and tilt
Propeller mark: F40
F60
Fuel and oil:
Recommended fuel:
Regular unleaded gasoline
Min. pump octane:
86
Fuel tank capacity:
24 L (6.34 US gal, 5.28 Imp.gal)
Recommended engine oil:
4-stroke outboard motor oil
Recommended engine oil group 1*:
SAE 10W-30/10W-40/5W-30
API SE/SF/SG/SH/SJ/SL
Recommended engine oil group 2*:
SAE 15W-40/20W-40/20W-50
API SH/SJ/SL
Total engine oil quantity (oil pan capacity):
2.1 L (2.22 US qt, 1.85 Imp.qt)
Lubrication:
Wet sump
Recommended gear oil: Hypoid
gear oil SAE#90
Tightening torque for engine:
Spark plug:
(1.84 kgf-m, 13.3 ft-lb) F60
25N·m
(1.84 kgf-m, 13.3 ft-lb) F40
25N·m
To Next Page
Loading...
