an additional support device to secure it
in the tilt position.
Cowling lock lever(s) (turn type)
To remove the engine top cowling, turn the
cowling lock lever(s) and lift off the cowling.
When installing the cowling, check to be sure it
fits properly in the rubber seal. Then lock the
cowling again by returning the cowling lock
lever(s) to the lock position.
1. Flushing device
1. Cowling lock lever(s)
TIP:
For details on usage, see page 69.
Fuel filter/Water separator
This engine has a combination fuel filter/wa-
ter separator and associated alert system. If
water separated from the fuel exceeds a
specific volume, the alert device of Com-
mand Link Tachometer will activate.
Flushing device
This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
1. Flushing device
To Next Page
Loading...
Need help?
General
