Instruments and indicators
carefully. This manual describes mainly the
alert indicators. For more details on setting
meters or changing indicator systems, see
the attached operation manual.
Command link multifunction
tachometers
The tachometer shows the engine revolu-
tions per minute. It has functions of trim
meter, adjusting trolling speed, cooling wa-
ter/engine temperature display, battery volt-
age display, total hour/trip hour display, oil
pressure display, water detection alert, en-
gine trouble alert, and periodic maintenance
notification. If the cooling water pressure
sensor is installed, the unit can also show the
cooling water pressure display. However,
even if the cooling water pressure sensor is
not installed, the cooling water pressure dis-
play can be shown by connecting an optional
sensor to the unit. For the optional sensor,
consult your Hidea dealer. The tachometer
unit is available in round or square types.
Check your tachometer unit type.
1. Tachometer
2. Trim meter
3. Multifunction display
4. Cooling water pressure
5. Cooling water/engine temperature
6. Water detection-alert indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
1
2
1. Set
button
1
2
2. Mode button
1. Set button
2. Mode button
To Next Page
Loading...
Need help?
General
