Instruments and indicators
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert indica-
tor blinks. Check the engine oil quantity and
replenish oil if necessary. If the alert device
has activated while the appropriate engine oil
quantity is maintained, consult your Hidea
dealer.
NOTICE
Do not continue to run the engine if the
low oil pressure alert device has activat-
ed. Serious engine damage will occur.
Overheat alert
If the engine temperature rises too high while
cruising, the overheat-alert indicator will start
to blink. The engine speed will automatically
decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the overheat alert device has ac-
tivated. Check the cooling water inlet for
clogging.
NOTICE
●
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
●
Do not continue to operate the engine if
a alert device has activated. Consult your
Hidea dealer if the problem can- not be
located and corrected.
Water separator alert
This indicator will blink if water has accumu-
lated in the water separator (fuel filter) while
cruising. In such an event, stop the engine
immediately and see page 95 of this manual
to drain the water from the fuel filter. Get
back to the port soon and consult a Hidea
To Next Page
Loading...
Need help?
General
