3-4 Fixture Operation x.Spot™ User Manual
Start Channel” on page 3-6. For more information on DMX Start channels, see
“Setting the DMX Start Channel” on page 2-11.
Error Message Display
Errors are displayed in short 8-character form when the menu system is locked.
Unlocked, menu system’s 2-line format displays more detailed information. For infor-
mation on accessing the detailed error message, see “Display Errors” on page 3-28.
For information on interpreting error messages, see “Error Message
Troubleshooting” on page 6-2.
Unlocking the Menu System
To unlock the menu system, press and hold the Menu button until the display
changes to the 2-line format. The menu system is protected against inadvertent menu
changes by requiring the Menu button to be held for a few seconds before allowing
entry to the menus. DMX Address Menu is the first option on the top menu level.
Exiting the Menu System
To exit the menu system, keep pressing the Menu button to back out of each menu
level until the High End Systems logo appears. The word AUTOLOCK will appear
briefly on the display to indicate the fixture’s software is “locking” the display. The
display switches back to the large 8-character format and, after a few seconds, begins
the standard display for the locked mode as described above.
The Menu System Structure
Figure 3-1 illustrates the Menu System’s top three levels. The following sections in
Chapter 3 describe options available in each of the top level menus and show
examples of specific options located in that menu.
Appendix D contains a complete Menu map of all the options and settings available
in the x.Spot Menu System.
To Next Page
Loading...
