5-2 General Maintenance x.Spot ™User Manual
Replacing Parts
Warnings: Disconnect power before servicing.
Replace fuses with the specified type and rating only.
Equipment surfaces may reach temperatures up to 130° C (266° F).
Allow the fixture to cool before handling.
Replacing Fuses
To replace a fuse:
1. Disconnect power to the fixture. If the fixture has been operating, allow the
fixture to cool before handling.
2. Use Figure 5-2 with Table 5-1 to determine which fuse to replace and its location
Figure 5-2 Locate and access fuses.
A
C
D
E
F
G
D
F
H
B
I
To Next Page
Loading...
