3-22 Fixture Operation x.Spot™ User Manual
2. On the crossloading fixture only, unlock the menu system by pressing and
holding down the Menu button until the extended 2-line display appears
indicating the top menu level.
3. Using the left and right arrows on the Navigation button, scroll to the FIXTURE
MODE MENU and press the Enter button to select.
4. Use the left and right arrows on the Navigation button to scroll to CROSSLOAD
FIRMWARE.
5. Use the up and down arrows on the Navigation button to scroll to the YES option
and press the Enter button to store. The fixture will upload its software to all
other x.Spot fixtures on the link.
When the crossload has finished successfully, CROSSLOADING COMPLETE will appear
briefly in the display of the crossloading fixture, and all other fixtures will
automatically home.
Note: If a new boot code was included with the latest software, the fixture displays a
BOOTDIFF error when it returns to the locked mode of the menu system. To
correct the boot code, copy the new boot code to each fixture (see “Copying
the Boot Code” on page 4-23).
To Next Page
Loading...
