Need help?Do you have a question about the High End trackspot and is the answer not in the manual?
General| Brand | High End |
|---|---|
| Model | trackspot |
| Category | Light Fixture |
| Language | English |
Explains the different operational modes available for controlling the fixture.
Explains the function of personality switches for setting operating and control modes.
Describes how to set address switches to determine fixture order or starting channel.
Steps for linking fixtures when using the DMX 512 control protocol.
Steps for linking fixtures when using the LWR control protocol.
Steps for linking fixtures when using standard analog control.
Steps for linking fixtures in master/slave mode for stand-alone operation.
General section on how to remove and replace internal components of the fixture.
Detailed steps for safely removing and installing a new lamp.
Addresses issues where the fixture shows no signs of power or operation.
Solutions for when the fixture's lamp fails to ignite or turn on.
Solutions for when the fixture's lamp unexpectedly turns off.
Solutions for when the fixture does not receive or process control signals.
Troubleshooting for when motors fail to operate and the Enable LED is not lit.
Information on DMX starting channels and parameters for fixture control.
Explains the configurations for personality switches to set operating and control modes.
Explains the configurations for address switches for LWR and master/slave modes.
Presents safety warnings in English regarding fire and electric shock protection.
Safety advice on UV exposure and preventing personal injury during operation.
To Next Page