High End trackspot - Table 2-3. Personality Switch Settings - Control Modes

Trackspot User Manual
Enabling the Control Mode
2-5
2
Table 2-3. Personality switch settings - control modes
Control
Modes
Personality
Switches
ON
Description
Low
Resolution
DMX mode
(channels 1-
256)
Configures the fixture to receive DMX
channels 1-256 in low resolution mode.
For more information, see “Low
Resolution Mode” on page A-1.
Low
Resolution
DMX mode
(channels
257-512)
Configures the fixture to receive DMX
channels 257-512 in low resolution
mode. For more information, see “Low
Resolution Mode” on page A-1.
High
Resolution
DMX mode
(channels 1-
256)
Configures the fixture to receive DMX
channels 1-256 in high resolution
mode. For more information, see “High
Resolution Mode” on page A-1.
High
Resolution
DMX mode
(channels
257-512)
Configures the fixture to receive DMX
channels 257-512 in high resolution
mode. For more information, see “High
Resolution Mode” on page A-1.
LWR protocol
The fixture must be controlled by LWR
protocol.
Standard
Analog
The fixture must be controlled by a 0-
10 volt standard analog controller.
Stand Alone
(Audio
Master)
Configures the fixture for stand alone
operation and designates the fixture as
the master. Also supplies power to the
controller when used with the
Trackspot Special Analog Controller.
Only one fixture in a link may be
selected as the master.
Stand Alone
(Audio Slave)
Configures the fixture for stand alone
operation and designates the fixture as
a slave.
PERSONALITY
on
8 7 6 5 4 3 2 1
PERSONALITY
on
8 7 6 5 4 3 2 1
PERSONALITY
on
8 7 6 5 4 3 2 1
PERSONALITY
on
8 7 6 5 4 3 2 1
PERSONALITY
on
8 7 6 5 4 3 2 1
PERSONALITY
on
8 7 6 5 4 3 2 1
PERSONALITY
on
8 7 6 5 4 3 2 1
PERSONALITY
on
8 7 6 5 4 3 2 1