Intro-2
Caution and Warning Symbols
Trackspot User Manual
• Built-in condenser microphone that picks up ambient bass to
trigger changes in the pre-programmed effects sequences
• Easy, quick lamp replacement with no optimization needed
• Remote system enable/disable using low voltage control
•Break-resistant mirror
• Pan and tilt invert option
• Low power consumption: 3.1 A @120V, 1.55 A @240V
• Complies with safety requirements in the USA, Canada, and the
European community.
Caution and Warning Symbols
The following international symbols appear in margins throughout this
manual to highlight caution and warning messages.
Cautions
Not heeding Caution messages could result in personal injury and/or
damage to equipment.
Caution: This symbol appears adjacent to Caution
messages.
Hot Surface: This symbol indicates a hot surface.
Warnings
Not heeding Warning messages could result in serious personal injury.
Warning: This symbol appears adjacent to high voltage
warning messages.
Fire Hazard: This symbol indicates that a fire hazard is
present.
Eye Protection: This symbol indicates that eye protection
is required.
Minimum Distance: This symbol indicates the minimum
distance to a lighted object, which in
this case is 1 meter.
1m
To Next Page
Loading...