Trackspot User Manual
Important Safety Information
D-1
D
Appendix D
Important Safety Information
English Version
WARNING: For Continued Protection Against Fire
1. This equipment is designed for use with Philips type QT 8500, 250
watt lamp only. Use of any other type lamp may be hazardous and
may void the warranty.
2. Do not mount on a flammable surface.
3. Maintain minimum distance of 1.0 meter (3.28 feet) from
combustible materials.
4. Replace fuses only with the specified type and rating.
5. Observe minimum distance to lighted objects of 1.0 meter (3.28
feet).
WARNING: For Continued Protection Against Electric Shock
1. If this equipment was received without a line cord plug, attach the
appropriate line cord plug according to the following code:
• brown–live
•blue–neutral
• green/yellow–earth
2. As the colors of the cores in the mains lead of this equipment may
not correspond with the colored markings identifying the terminals
in your plug, proceed as follows:
• the core which is colored green and yellow must be con-
nected to the terminal in the plug which is marked with
the letter “E” or by the earth symbol , or colored green
or green and yellow.
• the core which is colored blue must be connected to the
terminal which is marked with the letter N or colored
black.
• the core which is colored brown must be connected to the
terminal which is marked with the letter L or colored red.
3. This equipment must be earthed.
4. Disconnect power before re-lamping or servicing.
5. Equipment suitable for dry locations only. Do not expose this
equipment to rain or moisture.
6. Refer servicing to qualified personnel; no user serviceable parts
inside.
7. Class I equipment - this fixture employs a grounded type
receptacle and is not intended for connection to a two wire,
ungrounded source of supply.
To Next Page
Loading...