CA/CE-Series GigE Area Scan Camera·User Manual
5
Chapter 3 Camera Connection
3.1 Install MVS Client
Purpose:
The MVS client is used to connect the camera, set its parameters, etc.
The MVS client software is compatible with 32/64-bit Windows XP/7/10, 32/64-bit Linux, and
64-bit MacOS operating systems. Here we take Windows as an example.
Software version in this manual is V3.1.0. If other versions are used, the graphic user interface
may differ.
You can download Windows version client software from en.hikrobotics.com. For other
versions of client software, please contact technical support personnel via e-mail:
tech_support@hikrobotics.com to obtain it.
Steps:
1. Double click MVS installation package to install the client.
2. Read the Terms of the License Agreement and check it.
Figure 3-1 Installation Interface
3. Click Start Setup.
To Next Page
Loading...
