CA/CE-Series GigE Area Scan Camera·User Manual
56
Figure 10-12 Horizontal Color Bar Test Pattern
For different models of camera, the test pattern may be different, please refer to the actual one
you got.
10.6 Set Binning
The purpose of setting binning is to enhance sensibility. With binning, multiple sensor pixels are
combined as a single pixel to reduce resolution and improve image brightness. You can set binning
as shown below.
Steps:
1. Click Image Format Control.
2. Select proper value in Binning Horizontal and Binning Vertical.
Figure 10-13 Set Binning
Binning Horizontal refers to the image’s width, and Binning Vertical refers to the image’s
height.
For different models of camera, the binning function may be different, please refer to the
actual one you got.
To Next Page
Loading...
