CA/CE-Series GigE Area Scan Camera·User Manual
19
If the current real-time frame rate is larger than configured frame rate, the camera acquires
images according to the configured frame rate.
4. (Optional) Click Acquisition Control > Resulting Frame Rate to check the camera’s resulting
frame rate, as shown below.
Figure 7-2 Check Resulting Frame Rate
7.2 Set Acquisition Mode
The camera has 2 types of acquisition modes, including SingleFrame mode and Continuous mode
Under SingleFrame mode, the camera will automatically stop acquisition after acquiring 1 image.
Under Continuous mode, the camera acquires images continuously, and it will not stop until user
stops it manually.
Steps:
1. Click Acquisition Control > Acquisition Mode.
2. Select Continuous or SingleFrame according to actual demands.
Figure 7-3 Set Acquisition Mode
The acquisition mode is Continuous by default.
To Next Page
Loading...
