CA/CE-Series GigE Area Scan Camera·User Manual
6
3.2 Set Network Interface Card
It is required to set the Jumbo packet and the Internet Protocol for the former can reduce the CPU
usage and improve link efficiency, and the later ensures the connection between the device and
the computer.
Steps:
1. After installing MVS client, click Start Menu of the PC to find NIC_Configurator.
2. Click NIC_Configurator to run it.
3. Enable Jumbo Frame.
Figure 3-2 Set Jumbo Packet
4. Click Open in the Internet Protocol, select Obtain an IP address automatically, and click OK to
save.
Figure 3-3 Local NIC Settings
To Next Page
Loading...
