CA/CE-Series GigE Area Scan Camera·User Manual
8
Figure 3-4 Modify IP Address
6. Edit the information, and click OK.
You can modify the IP address of the device if its status is free.
When switching between static IP and DHCP, the device will restart automatically.
Change the IP address if the modified IP address conflicts with another device's IP address in
the same local subnet.
The parameters in the figure are only for reference. Please enter the parameters according to
the actual situation.
3.4 Connect Camera to MVS
Before you start:
Power on the camera.
Make sure your camera and the PC are in the same network segment.
Steps:
1. Run the MVS client software.
2. Click to connect the camera.
To Next Page
Loading...
