HikRobot CA Series - Page 22

CA/CE-Series GigE Area Scan Camera·User Manual
12
Table 5-2 Attribute Description
Attribute
Description
Device Control
You can view device information, edit its name, reset the
device, etc.
Image Format Control
You can view and set the device resolution, image
reverse function, pixel format, region of interest, test
pattern, etc.
Acquisition Control
You can view and set the device acquisition mode, frame
rate, trigger mode, exposure mode, etc.
Analog Control
You can view and set the device gain, black level,
Gamma correction, sharpness, etc.
Color Transformation
Control
You can view and set the device color transformation
related parameters.
LUT Control
You can view the Look-Up Table (LUT) and set its index
and value.
Digital IO Control
You can set the different input and output signals.
Action Control
You can view and set the device action control related
parameters.
Counter And Timer
Control
You can set the function of Counter 0 as trigger source.
File Access Control
You can view and set the device file access control
related parameters.
Event Control
You can view and set the device event control related
parameters to let the device generate an event and
transmit a related event message to the computer.
Chunk Data Control
You can view and set the device chunk data control
related parameters to generate supplementary image
data and append that data to every image that you
acquire.