CA/CE-Series GigE Area Scan Camera·User Manual
33
Figure 7-23 Set Action Command
Table 7-6 Parameter Description
The bitwise AND operation of the Group Mask against
the ActionGroupMask feature should results in non-zero.
4. Enable Scheduled.
5. Click in Benchmark Camera to select one camera from drop-list as benchmark camera.
Once benchmark camera is selected, other cameras keep time synchronization with it.
6. (Optional) Enter proper value in Delay Time.
The delay time should NOT be shorter than the maximum time required to transmit the
command across the network.
When the benchmark camera receives the command, all the cameras will trigger certain
actions simultaneously after the specified delay time.
To Next Page
Loading...
