EasyManuals Logo

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series User Manual

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series
222 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
Network Video Recorder User Manual
129
11.3 Configure Motion Detection Alarm
The motion detection enables the device to detect the moving objects in the monitoring area and
trigger the alarm.
Step 1 Go to System> Event>Normal Event>Motion Detection.
Figure 11-4 Set Motion Detection
Step 2 Select the camera to configure the motion detection.
Step 3 Check Enable.
Step 4 Set the motion detection area.
Full screen: click to set the full-screen motion detection for the image.
Customized area: use the mouse to click and drag on the preview screen to draw the
customized motion detection area (s).
You can click Clear to clear the current motion detection area settings and draw again.
Step 5 Set sensitivity (0-100). The sensitivity allows you to calibrate how readily movement triggers the
alarm. The higher value results in the more readily to trigger the motion detection.
Step 6 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 7 Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series and is the answer not in the manual?

HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series Specifications

General IconGeneral
BrandHIKVISION
ModelDeepinMind iDS-6700NXI-I/8F(B) Series
CategoryNetwork Hardware
LanguageEnglish

Related product manuals