Network Video Recorder User Manual
98
7.11 Configure Redundant Recording
Purpose:
Enabling redundant recording, which means saving the record files not only in the R/W HDD but
also in the redundant HDD, will effectively enhance the data safety and reliability. .
You must set the storage mode to Group before you set the HDD property to Redundancy. For
detailed information, please refer to Chapter 7.2.1 Configure HDD Group. There should be at least
another HDD which is in Read/Write status.
Step 1 Go to Storage > Storage Device.
Step 2 Select a HDD from the list and Click to enter the Local HDD Settings interface.
Step 3 Set the HDD property to Redundancy.
Figure 7-14 HDD Property-Redundancy
Step 4 Go to Storage > Schedule Settings > Record Schedule.
Step 5 Click Advanced to set the camera recording parameters.
To Next Page
Loading...
