Network Video Recorder User Manual
200
Chapter 19 General System Settings
19.1 Configure General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer speed through
the System > General interface.
Step 1 Go to System > General.
Figure 19-1 General Settings Interface
Step 2 Configure the following settings.
Language: The default language used is English.
Output Standard: Select the output standard to NTSC or PAL, which must be the same with
the video input standard.
Resolution: Configure the resolution of the video output.
Device Name: Edit the name of the device
Device No.: Edit the serial number of the device. The Device No. can be set in the range of
1~255, and the default No. is 255. The number is used for the remote and keyboard control.
To Next Page
Loading...
