Network Video Recorder User Manual
53
Chapter 3 Camera Management
3.1 Add the IP Cameras
3.1.1 Activate IP Camera
Purpose:
Before adding an IP camera, make sure the IP camera to be added is in active status.
Step 1 Click on the main menu bar to enter the Camera Management.
Step 2 Click Number of Unadded Online Device on the bottom of IP camera interface.
Step 3 Check inactive cameras and click Activate.
Step 4 Enter the same password in Create New Password and Confirm New Password.
Or you can check Use Channel Default Password to activate the camera with channel default
password.
Step 5 Click OK.
3.1.2 Add the IP Camera Manually
Purpose:
Before you can get live video or record the video files, you should add the network cameras to the
connection list of the device.
Before you start:
Ensure the network connection is valid and correct, and the IP camera to add has already been
activated.
Step 1 Click on the main menu bar to enter the Camera Management.
Step 2 Click the Custom Add tab on the title bar to enter the Add IP Camera interface.
To Next Page
Loading...
