HIKVISION DeepinMind iDS-6700NXI-I/8F(B) Series - Trigger or Clear Alarm Output Manually

Network Video Recorder User Manual
138
11.8 Trigger or Clear Alarm Output Manually
Purpose:
Sensor alarm can be triggered or cleared manually. When the Manually Clear is selected for the
dwell time of an alarm output, the alarm can be cleared only by clicking Clear button.
Step 1 Go to System> Event>Normal Event>Alarm Output.
Step 2 Select the alarm output you want to trigger or clear.
Step 3 Click Trigger/Clear to trigger or clear an alarm output.
Figure 11-12 Alarm Output