Video Security Control Panel User Manual
4. Edit the general information of the Zone, including name, probe type, arming Zone type, sensitivity, entering
delay, existing delay and so on.
Probe Type: Select the type of the detector.
Arming Zone Type: Select the type of Zone in the partition
Sensitivity: Select the response time of the Zone.
5. Select the linked siren and linked trigger.
6. Click Copy to to copy all these settings to other Zones.
7. Click Apply to save the settings.
Trigger Settings
Steps:
1. Enter the Zone configuration interface.
Remote Settings-> Alarm-> Trigger
2. In the Alarm Output list, select an alarm input channel and click the icon to enter zone configuration
page.
To Next Page
Loading...
Need help?
General
