HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--44--
Command
Description
Command
Description
493
GPRS Center 1 Protocol and
Programming Address of
Account Setting
496
GPRS Center 2 Protocol and
Programming Address of
Account Setting
{2} Protocol Type:
Command
Description
Command
Description
1
HIK
2
NAL2300
{3} Account (control panel No., 6~9 digits);
{4} End the command.
Printer Parameters Settings 3.1.16
The programming commands of printer parameters setting are as below:
499 0 0 0 #
1
2 3
4
5
{1} The programming command address of printer parameter setting is:499;
{2} Enable/disable the printer;
Command
Description
Command
Description
0
Disable the Printer
1
Enable the Printer
{3} Enable/disable the off-line detection of printer;
Command
Description
Command
Description
0
Disable the Off-line
Detection of Printer
1
Enable the Off-line Detection
of Printer
{4} Whether to print the reporting time or not, known as the time of control panel when event/alarm
occurs;
Command
Description
Command
Description
0
Not print the reporting time
1
Print the reporting time
{5} End of the command.