HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--62--
613 0 000 #
1
3
4
2
{1} Center group zone alarm report Programming address: 613, 617, 621, 625, 629 and 633.
Command
Command Description
Command
Command Description
613
Center group 1 zone alarm
report Programming address
617
Center group 2 zone alarm
report Programming
address
621
Center group 3 zone alarm
report Programming address
625
Center group 4 zone alarm
report Programming
address
629
Center group 5 zone alarm
report Programming address
633
Center group 6 zone alarm
report Programming
address
{2} Delete/Add
{3} Zone No.
{4} End the command.
The operation of adding/ deleting is just for current center group sending/not sending report, and will not impact
other center groups.
Center Group Non-zone Alarm Report Settings 3.1.35
To configure the non-zone alarm report of the center group, please refer to the command below.
614 1 1 1 1 1 1 1 1 1 1 #
1
4 5 7
8
9
2 3 6
10
11
12
{1} Center Group Non-zone Alarm Report Programming Address: 614, 618, 622, 626, 630and 634.
Command
Command Description
Command
Command Description
614
Center Group1 Non-zone
618
Center Group 2Non-zone