HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--37--
Command
Command Description
Command
Command Description
2
4.7KΩ
3
5.6KΩ
4
8.2KΩ
{13} End the command. .
Zone Linked Trigger Settings 3.1.4
The detailed programming command is shown below.
467 000 0 00 #
1
43
5
2
{1} Trigger Settings Programming Address: 467
{2} Zone No.
{3} Adding/Deleting Trigger
Command
Command Description
Command
Command Description
0
Delete
1
Add
{4} Trigger No.
{5} End the command.
After successfully operating once, you can continuously do configuration with the command of {Project} + {Trigger
No.}+{#}.
Trigger Event Linkage Settings 3.1.5
For trigger event linkage configuration, please refer to the command below.
468 00 0 00 00 #
1 4
2
3
5
6
{1} The programming address of enabling trigger event linkage is 468～469.