HIKVISION DS-19S08N-04F/K Series User Manual

Video Security Control Panel User Manual
--36--
Command
Command Description
2
NO Type of Loop with Tampering Prevention Zone
Loop
The fire alarm zone does not support the configuration of zone loop type, and can only be set as 0, or
an error value will be returned.
{9} Tampering Prevention Linked Trigger
Command
Command Description
Command
Command Description
0
Non-linked Local Alarm
Output
1
Linked Local 1 Alarm
Output
2
Reserved
3
Reserved
4
Reserved
5
Reserved
6
Reserved
7
Reserved
8
Reserved
9
Reserved
*0
Reserved
*1
Reserved
*2
Reserved
*3
Reserved
*4
Reserved
*5
Reserved
{10} Tampering Prevention Linked Siren Output
Command
Command Description
Command
Command Description
0
No Linked Siren Output
1
With Linked Siren
Output
{11} No Tampering Prevention Recovery Report
Command
Command Description
Command
Command Description
0
No Tampering
Prevention Recovery
Report
1
With Tampering
Prevention Recovery
Report
{12} Selection of the tamper-proof EOL resistance.
Command
Command Description
Command
Command Description
0
2.2KΩ
1
3.3KΩ

HIKVISION DS-19S08N-04F/K Series Specifications

General

Brand	HIKVISION
Model	DS-19S08N-04F/K Series
Category	Control Panel
Language	English