HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--60--
Center Group Enabling Settings 3.1.32
To enable the center group, please see the command below.
611 0 #
1
2 3
{1} Center Group Enabling Programming Address: 611, 615, 619, 623, 627and 631.
Command
Command Description
Command
Command Description
611
Center Group 1 Enabling
Programming Address
615
Center Group22 Enabling
Programming Address
619
Center Group 3 Enabling
Programming Address
623
Center Group 4 Enabling
Programming Address
627
Center Group 5 Enabling
Programming Address
631
Center Group 6 Enabling
Programming Address
{2} Enable/Disable the center group
Command
Command Description
Command
Command Description
0
Disable
1
Enable
{3} End the command.
This the number of center groups varies depending on the models of the control panel.
Center Group Uploading Mode Settings 3.1.33
To configure the center group uploading mode, please see the command below.
612 0 0 0 0 #
1 2
4
63 5