HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--63--
Command
Command Description
Command
Command Description
Alarm Report Programming
Address
Alarm Report Programming
Address
622
Center Group3 Non-zone
Alarm Report Programming
Address
626
Center Group 4 Non-zone
Alarm Report Programming
Address
630
Center Group 5 Non-zone
Alarm Report Programming
Address
634
Center Group 6 Non-zone
Alarm Report Programming
Address
{2} Soft zone Report
{3} System Status Report
{4} Alarm Clearing Report
{5} Testing Report
{6} Arming Report
{7} Disarming Report
{8} Control Panel Duress Report
{9} Alarm Recovery Report
{10} Bypass Report
{11} Bypass Recovery Report
{2}～{11}Set the value as 1 to send the report. Set the value as 0 not to send the report.
Command
Command Description
Command
Command Description
0
Not Sending
1
Sending
{12} End the command.
White-list Parameters Settings 3.1.36
Non-zone Alarm Report Settings
To configure the non-zone alarm report, please refer to the command below.
680 00 0 0 0 0 0 0 0 0 0 0 0 #
1
2 4 63 5
87
9
10
11 12
13 14