HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--33--
Operator Settings 3.1.2
The operator configuration programming command is shown below.
001 *2 1234 #
1 2 3 4
{1} Operator Programming Address: 001～200.
{2} User Permission: 12 permissions. For details, please refer to the following table.
{3} Specified the user name and password, the length of user name and password should be 2 to 5
characters.
{4} End the command.
No.
Permission
No.
Permission
1
Arming
No Arming Report
Unavailable Bypass
2
Disarming
No Disarming Report
Unavailable Bypass
3
Arming/Disarming
No Arming/Disarming Report,
Unavailable Bypass
4
Arming
Arming Report
Unavailable Bypass
5
Disarming
Disarming Report
Unavailable Bypass
6
Arming/ Disarming
Arming/Disarming Report
Unavailable Bypass
7
Arming
No Disarming Report
Bypass
8
Disarming
No Arming/Disarming Report
Bypass
9
Arming/Disarming
No Arming/Disarming Report
Bypass
*0
Arming
Arming Report
Bypass
*1
Disarming
Disarming Report
Bypass
*2
Arming/Disarming
Arming/Disarming Report
Bypass