HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--59--
1
2
3
570
0
3
#
{1} The DHCP configuration address is 570
{2} Enable DHCP function?
Command
Description
Command
Description
0
Disable
1
Enable
{3} End the command.
Delay Zone Time Settings 3.1.31
The programming command of configuring zone time is shown below.
1
2 3
610
0
0
4
0
5
0
6
0
7
0
8
0
9
0
10
0
11
0
12
0
13
#
{1} The configuration address of delay zone time settings is 610.
{2} The hundreds’s digit of the zone No.
{3} The tens’ digit of the zone No.
{4} The units’ digit of the zone No.
{5} The thousands’ digit of the delay exiting time
{6} The hundreds’s digit of the delay exiting time
{7} The tens’ digit of the delay exiting time
{8} The units’ digit of the delay exiting time
{9} The thousands’ digit of the delay entering time
{10} The hundreds’s digit of the delay entering time
{11} The tens’ digit of the delay entering time
{12} The units’ digit of the delay entering time
{13} End the command
The range of zone No. is 1 to 8/16.
The range of entering/exiting delay time is 1 to 5999s.