HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--68--
Zone Report Type Settings
To configure the zone report type, please refer to the command below.
686 01 0 0 0 0 #
1 2 4
6
3
5 7
{1} Zone Report Type Settings Command Address: 686.
{2} It indicates the white list number. 01~08 indicate white list No.1~No.8.
{3} Set the value as 1 to send the report. Set the value as 0 not to send the report.
Command
Command Description
Command
Command Description
0
Not Sending
1
Sending
{4} zone No.: Hundreds’ Digit
{5} zone No.: Tens’ Digit
{6} zone No.: Digit
 When the zone No. has no hundreds’ digit, {4} can be omitted.
Example: When you want to send report of zone No.16. The command is 68601116#.
 When the zone No. has no hundreds’ digit and tens’ digit, {4} and {5} can be omitted.
Example: When you want to send report of zone No.8. The command is 6860118#.
{7} End the command.
After operating once, you can continuously configure with the command of {Project} + {zone No.} + {#}
Schedule Settings 3.1.37
Enabling Weekly Schedule
To enable the weekly schedule, please refer to the command below.