Video Security Control Panel User Manual
{4} The user defined interval time: Thousands’ Digit
{5} The user defined interval time: Hundreds’ Digit
{6} The user defined interval time: Tens’ Digit
{7} The user defined interval time: Digit
{4}~{7}Valid only when {3} is 6.
{8} End the command.
Telephone Number Settings
To configure the telephone number, please refer to the command below.
685 01 1 E0 ∙∙∙∙∙∙0 #
1 4 5
2 3
{1} Telephone Number Command Address: 685.
{2} It indicates the white list number. 01~08 indicate white list No.1~No.8.
{3} Telephone Segment
The first 16 characters of the 32
characters
The last 16 characters of
the 32 characters
{4} The dialing number is 16 bytes.
The letter E at the beginning of {5} can be set as A, indicating “+”.
The length of the each telephone number is 31 bytes, and all the telephone number should be
ended with *4.
{5} End the command.
To Next Page
Loading...
Need help?
General
