Video Security Control Panel User Manual
683 00 0 0 0 0 0 0 0 0 #
1
2 4 63 5
87
9
10
11
{1} Partition Alarm Clearing Permission Settings Command Address: 683
{2} It indicates the white list number. 01~08 indicate white list No.1~No.8.
{3} The Alarm Clearing Permission of Partition 1
{4} The Alarm Clearing Permission of Partition 2
{5} The Alarm Clearing Permission of Partition 3
{6} The Alarm Clearing Permission of Partition 4
{7} The Alarm Clearing Permission of Partition 5
{8} The Alarm Clearing Permission of Partition 6
{9} The Alarm Clearing Permission of Partition 7
{10} The Alarm Clearing Permission of Partition 8
{3}~{10} It indicates to enable/disable the permission of Partition Alarm Clearing.
{11} End the command.
The Interval Time of White-list Settings
To configure the interval time of white list, please refer to the command below.
684 01 0 0 0 0 0 #
1 2 3 54 6 87
{1} The interval time of White List Settings Command Address: 684.
{2} It indicates the white list number. 01~08 indicate white list No.1~No.8.
{3} It indicates the interval time. The command is shown below.
To Next Page
Loading...
Need help?
General
