HIKVISION DS-19S08N-04F/K Series

Video Security Control Panel User Manual
--43--
This function varies depending on the models of the control panel.
Uploading Center Port Settings 3.1.14
The programming commands of uploading center port setting are as below:
486 00000 #
1
2 3
{1} The programming command address of uploading center port setting are: 486, 489, 492, 495;
Command
Description
Command
Description
486
Programming Address of
Network Center 1 Port
Setting
489
Programming Address of
Network Center 2 Port
Setting
492
Programming Address of
WIFI Center 1 Port Setting
495
Programming Address of
WIFI Center 2 Port Setting
{2} Port Number;
{3} End the command.
Center Protocol and Account Settings 3.1.15
The programming commands of center protocol and account setting are as below:
487 2 000000000 #
1
3
4
2
{1} The programming command address of center protocol and account setting are: 487, 490, 493, 496;
Command
Description
Command
Description
487
Network Center 1 Protocol
and Programming Address
of Account Setting
490
Network Center 2 Protocol
and Programming Address of
Account Setting