Video Security Control Panel User Manual
{1} Enabling Weekly Schedule Command Address: 690.
{2} It indicates the partition number. 01~08 indicate partitions No.1~No.8.
{3}
{4} It indicates to enable/disable the weekly schedule.
{5} End the command.
Weekly Schedule Time Parameter Settings
To configure the time parameters of the weekly schedule, please refer to the command below.
691 01 1 1 0 0 0 0 0 0 0 0 E #
1
2 4 63 5
87
9
10
11 12
13 14
{1} Weekly Schedule Time Parameter Settings Command Address: 691.
{2} It indicates the partition number. 01~08 indicate partitions No.1~No.8.
{3} Day of the Week
{4} It presents the time bucket composed by {5}~{12}. The value range is 1~8.
To Next Page
Loading...
