HIKVISION DS-19S08N-04F/K Series User Manual

Video Security Control Panel User Manual
--38--
Command
Function Description
Command
Function Description
468
Enable Trigger Event
Linkage
469
Disable Trigger Event
Linkage
{2} Trigger No.
{3} Adding /Deleting Trigger
Command
Function Description
Command
Function Description
0
Delete Trigger
1
Add Trigger
{4} Selecting Device/System
Command
Function Description
Command
Function Description
00
Device
01
System
{5} Event No.
The device event command is shown below.
Command
Command Description
Command
Command Description
00
None
03
Reserved
01
AC Power Down
04
Wired Network
Exception
02
Low Battery
05
No Network Exception
The system event command is shown below.
Command
Command Description
Command
Command Description
01
Entering Delay
05
Alarm
02
Exiting Delay
06
Alarm Clearing
03
Arming
07
Alarm Recovery
04
Disarming
{6} End the command.
After successfully operating once, you can continuously do configuration with the command of {Project} + {Trigger
No.} + {System Command.} + {Event Command} + {#}.

HIKVISION DS-19S08N-04F/K Series Specifications

General

Brand	HIKVISION
Model	DS-19S08N-04F/K Series
Category	Control Panel
Language	English