Video Security Control Panel User Manual
Steps:
1. Select the user type. Operator and installer can be selected.
2. Select the index number of the keypad user, up to 16 numbers can be selected.
3. Enter the name of the keypad operator.
4. Enter the password of the operator.
5. Click the dropdown menu to select the user permission.
6. Click Apply to save the settings.
Camera Settings
You can select to enable analog camera or add, edit, remove, and view status of network camera in this section.
Steps:
1. Enter the general camera configuration page.
Remote Settings-> System ->Camera
To Next Page
Loading...
Need help?
General
