HIKVISION DS-2XS6A87G1-LS/4G - 5.3 Capture Configuration

Chapter 6 Event and Alarm
This part introduces the conguraon of events. The device takes certain response to triggered
alarm.
6.1 Basic Event
6.1.1 Set Moon Detecon
It helps to detect the moving objects in the detecon region and trigger the linkage acons.
Steps
1.
Go to
Conguraon → Event → Basic Event → Moon Detecon .
2.
Check Enable Moon Detecon.
3.
Oponal: Highlight to display the moving object in the image in green.
1) Check Enable Dynamic Analysis for Moon.
2) Go to
Conguraon → Local .
3) Set Rules to Enable.
4.
Select
Conguraon Mode, and set rule region and rule parameters.
-
For the
informaon about normal mode, see Normal Mode .
-
For the informaon about expert mode, see Expert Mode .
5.
Set the arming schedule and linkage methods. For the informaon about arming schedule
sengs, see Set Arming Schedule . For the informaon about linkage methods, see Linkage
Method Sengs .
6.
Click Save.
Expert Mode
You can congure the moon detecon parameters of day/night switch according to the actual
needs.
Steps
1.
Select expert mode in
Conguraon.
2.
Set parameters of expert mode.
Day/Night Switch
OFF: Day/night switch is disabled.
Day/Night Auto-Switch: The system switches day/night mode
automacally according to
environment. It displays colored image at day and black and white image at night.
Network Camera User Manual
34