HIKVISION DS-2XS6A87G1-LS/4G User Manual

Detecon Target
Human and vehicle are available. If the detecon target is not selected, all the detected
targets will be reported, including the human and vehicle.
Target Validity
If you set a higher validity, the required target features should be more obvious, and the
alarm accuracy would be higher. The target with less obvious features would be missing.
Figure 10-3 Set Rule
6.
Oponal: You can set the parameters of mulple areas by repeang the above steps.
7.
For the arming schedule
sengs, refer to Set Arming Schedule . For the linkage method sengs,
refer to Linkage Method Sengs .
8.
Click Save.
10.3.4 Set Region
Exing Detecon
It is used to detect objects exing from a predened virtual region. If it occurs, the device can take
linkage
acons.
Before You Start
●
For certain device models, you need to enable the smart event
funcon on VCA Resource page
rst.
●
For the device supporng HEOP, go to VCA → APP to import and enable Smart Event.
Steps
1.
Go to VCA → Smart Event → Region Exing Detecon . For certain device models, you should
go to Conguraon → Event → Smart Event → Region Exing Detecon .
Network Camera User Manual
93

HIKVISION DS-2XS6A87G1-LS/4G Specifications

General

Brand	HIKVISION
Model	DS-2XS6A87G1-LS/4G
Category	Security Camera
Language	English