Chapter 11 Smart Display
This funcon displays real me pictures captured by smart funcons and analyzes the target in real
me.
Note
The funcon is only supported when certain smart funcons are enabled.
Live View Parameter
Icon Funcon
Capture a picture.
Start or stop recording.
Adjust the volume of live view. Move the slider
to right to turn up the volume and le to turn
down the volume. Move to the le end to mute
the live view.
Download Display Pictures
Click and the device stores captured pictures to the browser cache. Hover the pointer over the
icon to see the number of pictures in the cache. Click again to download the pictures in a
package.
Note
The browser cache has a limited size. The recommended number of pictures to download is no
more than 200.
Layout
Click and choose Layout. Check the display content you need to add it to the smart display
page. When
real-me analyze is selected, you can choose the contents you want to display.
Detect Feature
Click
and choose Detect Feature. Check the corresponding checkbox to display the features of
the detecon target.
Network Camera User Manual
102
To Next Page
Loading...
Need help?
General
