HIKVISION DS-K1T321 Series User Manual

Note
The funcons vary according to dierent models. Refers to the actual device for details.
10.6.10 Set Image Parameters
You can adjust the image parameters, video parameters, supplement parameters and capture
interval.
Steps
1.
Click Conguraon → Image .
2.
Congure the parameters to adjust the image.
Video Adjust(Video Standard)
Set the video frame rate when performing live view remotely. Aer changing the standard,
you should reboot the device to take
eect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
Image Adjustment
Drag the block or enter the value to adjust the live video's brightness and contrast.
Supplement Light Parameters
Set the supplement light type, mode, start
me and end me. You can also set the
brightness.
Capture Interval
You can select the capture interval according to your actual needs.
3.
Click Default to restore the parameters to the default
sengs.
10.6.11 Access Control
Sengs
Set Authencaon Parameters
Click Conguraon → Access Control → Authencaon Sengs .
Note
The funcons vary according to dierent models. Refers to the actual device for details.
DS-K1T321 Series Face Recognion Terminal User Manual
91

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English