Chapter 9 Quick Operaon via Web Browser
9.1 Select Language
You can select a language for the device system.
Click in the top right of the web page to enter the Device Language Sengs page. You can
select a language for the device system from the drop-down list.
By default, the system language is English.
Note
Aer you change the system language, the device will reboot automacally.
Click Next to complete the sengs.
9.2 Time
Sengs
Set Time and DST
Figure 9-1 Time Sengs
Click → Time Sengs .
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
DS-K1T321 Series Face Recognion Terminal User Manual
77