EasyManuals Logo

HIKVISION DS-K1T321 Series User Manual

HIKVISION DS-K1T321 Series
132 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Change via Security Quesons
If you need to change password via security quesons, you can set security quesons on Web.
Press ESC.
Note
You can only select one type to change password. If you need, you can enter the web page to set
both of the changing types.
6.3 Set Network Parameters
Aer acvaon and select applicaon mode, you can set the network for the device
Steps
1.
When you enter the Select Network page, select Wired Network or Wi-Fi for your actual needs.
Figure 6-2 Select Network
Note
Disconnect the wired network before connecng a Wi-Fi.
2.
Select Next.
Wired Network
Note
Make sure the device has connected to a network.
If enable DHCP, the system will assign the IP address and other parameters automacally.
DS-K1T321 Series Face Recognion Terminal User Manual
19

Table of Contents

Other manuals for HIKVISION DS-K1T321 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HIKVISION DS-K1T321 Series and is the answer not in the manual?

HIKVISION DS-K1T321 Series Specifications

General IconGeneral
BrandHIKVISION
ModelDS-K1T321 Series
CategoryTouch terminals
LanguageEnglish

Related product manuals