HIKVISION DS-K1T321 Series User Manual

If disable DHCP, you should set the IP address, the subnet mask, and the gateway.
Wi-Fi
Select a Wi-Fi and enter the Wi-Fi's password to get connected.
Or select Add Wi-Fi and enter the Wi-Fi's name and the password to get connected.
3.
Oponal: Select Back to skip network sengs.
6.4 Access to Plaorm
Enable the funcon and the device can communicate via Hik-Connect. You can add the device to
Hik-Connect modile client and so on.
Steps
1.
Enable Access to Hik-Connect, and set the Server IP and
Vericaon Code.
2.
Press OK.
6.5 Privacy
Sengs
Aer acvaon, selecng network, you should set the privacy parameters, including the picture
uploading and storage.
Select parameters according to your actual needs.
Figure 6-3 Privacy
Upload Pic. When Auth. (Upload Picture When Authencang)
Upload the pictures captured when authencang to the plaorm automacally.
Save Pic. When Auth. (Save Picture When Authencang)
DS-K1T321 Series Face Recognion Terminal User Manual
20

HIKVISION DS-K1T321 Series Specifications

General

Brand	HIKVISION
Model	DS-K1T321 Series
Category	Touch terminals
Language	English